PP print Printing-Kit for Ultimaker S5
The 'PPprint Printing-Kit for Ultimaker S5' enables simple, high-quality and reproducible 3D printing of polypropylene (PP) on the Ultimaker S5. The printing kit consists of the print bed support 'P-surface 141' (330mm x 240mm), the 'P-roller 621' for applying the print bed support, the P-cutter, as well as the 'P-wipe 515' and the 'P- cleaner 298 'for cleaning and maintaining the' P-surface 141 '.
The 'PPprint Printing-Kit for Ultimaker S5' was specifically tailored to the Ultimaker S5 and contains everything you need for successful and reliable extrusion-based 3D printing with the polypropylene filament 'P-filament 721' . The included print surface 'P-surface 141' guarantees optimized adhesion during 3D printing and allows simple and non-destructive removal of the components after completion. The 'P-roller 621' hand roller makes it easier to apply the print edition. In addition, 'P-wipe 515' and 'P-cleaner 298' can be used advantageously for cleaning and maintaining the 'P-surface 141' and thus have a positive effect on the service life of the 'P-surface 141'.
Further information on the individual components of the 'PPprint Printing-Kit for Ultimaker S5' can be found in the descriptions of the individual products.
Contents of the 'PPprint Printing-Kit for Ultimaker S5': Link products
Instructions for applying the P-surface 141
P-filament 721 pressure profile for the Ultimaker S5
Cleaning and care of the 'P-surface 141': Wash the 'P-wipe 515' thoroughly with lukewarm water before using it for the first time. To clean the 'P-surface 141', apply a small amount of the 'P-cleaner 298' and distribute it evenly with a paper towel. After a short exposure time (approx. 1 minute), the 'P-cleaner 298' can be completely removed with the paper towel. Finally, the 'P-surface 141' should be wiped off with the hand-washed and moistened 'P-wipe 515'. After use, wash the 'P-wipe 515' in clear water, wring it out carefully and then pull it into shape. Do not dry the 'P-wipe 515' in the sun or on a radiator.
